CHAMPKEY Golf Grips 13 Pack | Come with Solvent,15 Tapes,Vise Clamp and Hook Blade | All Weather Control and High Feedback Golf Club Grips

Let me start with I have been regripping golf clubs and rebuilding them since the early 90’s as a teenager in golf shops around Chicago Suburbs. I have recapped lambskin rewhipped persimmon woods you name it I have done it. Even managed a Golfsmith back in the day.I love the pricier Winn grips but they just don’t last especially now that I am in AZ heat. So I decided to try a cheap grip package in fact one of the cheapest I found.Fast forward after a quick 2 day delivery and upon opening I always inventory the supplies before I get started. 13 grips, 15 tape strips (which brilliantly have a split in the protective paper to make it easy to remove) extra is always nice, vice block, knife with hook blade, bottle of solvent (double sealed and in a plastic heat sealed bag nice packaging).Perfect and bonus tape, I was skeptical of the solvent but I am probably more liberal in my application having always used bulk gallons of spirits. But the quantity was good and a little extra, albeit I was a bit miserly worrying about the quantity.The tape was a breeze to put on, I still prefer to work with a roll of tape vs strips but that’s just me. The solvent wasn’t overly odorous in fact way more mild than straight mineral spirits, the grips slid right over the shafts carbon and steel. Alignment was quick and easy and the glue and solvent residue wiped right off when done.I have yet to take these out and hit, but bought a 3 pack last year for a set of woods (without the kit) and they are still coming strong.The grips themselves remind me of tour velvet 1/2 cord in feel and I went with midsize because I have arthritis and it really helps.I’m overall I would not hesitate to recommend these and will be on the lookout for them in a year or so when I need to do this again.100 percent recommend this kit!

I wanted to go up a grip size but everyone around wanted to charge $200+ to regrip the whole bag. I ordered these. The process was super easy and a third of the price. Don't skimp on the solvent, there is way more than enough. Over all took me just over an hour to do my entire bag. It was my first time doing it. I like the feel of the grips and the size is great. Well worth the money.

good feel, grip made of ribber hope it will last a while, easy to install , adhesive strip could be a little longer to cover the end of shaft, cap for the solvent is to big for bottle cant seal leaks

Let me start by saying I have never regripped clubs before. My original grips were in rough shape. My irons are close to 10 years old and I couldn't justify buying new ones with how little I get to play these days so I decided to regrip them myself. After shopping around I purchased these based off reviews on both amazon and youtube. These grips did not disappoint! From what I can tell they are an exact replica of the GolfPride MCC Plus grip. It wouldn't surprise me if they are made in the same factory. They have a very nice half cord with lots of grip at the top and a nice soft low tack at the bottom. I watched a handful of youtube videos to learn the gripping process. From removing the old grips to applying the new ones it took me about 2 hours for 13 clubs.Given this was a kit I was a little hesitant about what the quality of the other materials would be. The grip tape is great, precut, already sized for the grips, super convenient. The solution was plenty, just collect the runoff and funnel back into the bottle after every 4 clubs. When I finished I still had 2/3 bottle of grip solution left. The blade did not impress me but I think that is personal preference, I didn't care for the hook. I used a utility knife with a stanley heavy duty blade and my old grips came off in a flash.Tips for regripping:1. When applying tape work from the top down when smoothing. This forces any tape wrinkles to the bottom where your hand wont be, you only grip the top 3/4 of the grip.2. You don't need to be a perfectionist. I had a couple clubs with long wrinkles in the tape. When complete you can't feel them. This is kind of "princess and the pea" situation.3. Leave 1/2" + tape overhang at the top of the shaft. This lets you seal the shaft so no debris gets and results in a rattle. Again, your hands only cover the top 3/4 of the grip so better to have to to much tape at the top than worry about covering where you don't grip.4. Glue begins to set FAST. Slide the grip all the way on and then align. Don't mess with it as you are sliding it down the shaft because it only takes 10 or 15 seconds for the grip to start binding up.5. When done flip the club upside down and tap on the ground to ensure the shaft is firmly seated at the but of the grip.6. Let dry upside down so solvent in the shaft and grip drain out.7. Start with the clubs you hit least often. If this is your first time your first grip or two wont be perfect. I did my 4i and 7w. While there were some wrinkles and learning curve getting my process down the gripping is totally adequate for a club I only hit or throw once in a while.8. Give clubs adequate dry time! Some videos say 1hr is sufficient. That is BS. Allow to dry overnight.

They offer exceptional all-weather performance, high feedback, and durability, making them a fantastic investment for any golfer looking to enhance their game. I highly recommend these grips to fellow golf enthusiasts.What I Liked:All-Weather Performance: These grips truly deliver on their promise of all-weather performance. Whether it's rainy or sunny, the traction and feel remain consistent, providing a reliable grip throughout my rounds.High Feedback: The feedback from these grips is outstanding. I could feel the clubhead better during my swing, offering improved control and shot accuracy.Durable Construction: The grips are made with high-quality materials, ensuring durability and longevity. They held up well under various weather conditions and didn't show signs of wear after multiple rounds.Easy to Install: The installation process was straightforward, and the included repair kits made it even more convenient. I appreciated having everything I needed in one package.Versatile for Different Clubs: These grips are suitable for various clubs in my bag, providing a consistent feel and performance across all of them.

Very comparable to top brands. You won't be disappointed.

Great product. Great value. Easy to install, and everything needed is included.Very nice!!

After the first one ( which I messed up ) the rest were easy. Use a lot of solvent, and put the solvent inside the grips too. Then they slid on easy enough. The feel of them is great, and I'm looking forward to hitting the course. Will buy again

I like the fact the grips come with tape(s), solvent, hook knife and rubber shaft holder for vise.Easy to do at home and would recommend.